assmann electronics, inc. this drawing is unpublished ?copyright 2009 by assmann electronic components all international rights reserved 1840 w. drake drive, suite 101 ? tempe, az 85283 toll free: 1-877-277-6266 ? email: info@usa-assmann.com rohs compliant item no. title dn-93601-u/y cat.6 unshielded keystone jack, 90 tool free type, yellow material: 1 rj45 jack housing: abs, ul94v-0 - with optional color 2. jack bracket set: pbt, ul94v-0 3. rj45 jack contact material & finished - phosphor bronze - contact area: min. 3mm 50 micro-inch gold plated over nickel plated 4. idc housing: pc, 94v-2 5. idc terminal material & finished: - phosphor bronze w/min. 50 micro-inch tin plated - suitable for 23-24awg stranded & solid wire 6. idc cap: pc, ul94v-2 electrical: ? wiring: t568a & t568b ? insertion force: 900 gm for 8 contacts ? retention strength: 7.7kg between jack & plug ? operating temperature: -10c ~ +60c ? durability: jack: 750 cycles plug-jack mating and unmating test, insertion cycles at 20 cycles/ minute max. contact resistance test per 100 cycles. ? the cat.6 transmission performance is in compliance with the ansi/tia/eia 568 b.2-1 standard
assmann electronics, inc. 5q 5r 5q 5r keystone jack installing instruction 5p 5p5p5p 5p5p 5p5p5p 5p 5p5p5p5p 5p5p5p 5p 5p5p5p 5p 5p5p5p5p5p 5p 5p5p5p 5p5p5p5p 5p 5p 5p 5p5p5p 5p5p5p5p 5p 5p 5p 5p5p5p 5p 5p5p5p5p 5p5p5p 5p 5p5p5p 5p 5p5p5p5p5p 5p 5p5p5p 5a 5p 5b dn-93501-u/x and dn-93601-u/x 30mm unshielded type cable tie shielded type strip approximately 30mm of the cable jacket, and separate to 4 pair each. 5c 5p 5d 5p 5e 5c 5p 5d 5p 5e 21 5f 3 54 78 colored sticker t568a pin 1 white/green pin 2 green pin 3 white/orange pin 4 blue pin 5 white/blue pin 6 orange pin 7 white/brown pin 8 brown t568b pin 1 white/orange pin 2 orange pin 3 white/green pin 4 blue pin 5 white/blue pin 6 green pin 7 white/brown pin 8 brown follow the direction on the plastic lid color- coding to position t568a or t568b wiring, separate a little space on proper position and insert the wire pair by pair into each slot. plug the easy tool into upper hole, then press down to close plastic lid to connect the wires. complete the installation. follow the direction on the plastic lid color- coding to position t568a or t568b wiring, separate a little space on proper position and insert the wire pair by pair into each slot. insert the cable tie to tight up the cable jacket. then complete the installation. cable tie half shielded fully shielded plug the easy tool into upper hole, then press down to close plastic lid to connect the wires. attn: suitable for 23~24 awg solid wire tool tool b a b a
|
